Vinyl Fishing Lure Paint - Regular Colors
Move cursor over picture for a "Zoomed In View".
Zoom will appear to the right of the main picture.
Vinyl Lure & Jig Paint is an extremely hard,
fast drying finish used by many lure
manufacturers. It may be applied by dipping,
brushing, or spraying. Stir paint well before
using. Do not smoke or use around sparks or
open flame. Use with adequate ventilation.
Please Note: The "thickness" of vinyl paint, especially glow and pearl colors, may vary significantly due to the pigments added. Barlow's recommends that you purchase vinyl paint thinner to adjust the paint to the desired thickness.
Directions: Coat Jig Heads with White Base
Coat which does the bonding to the metal.
Apply paint to obtain desired finish. White
finish may require 2 coats. Most colors only
require 1 coat. Each coat will dry to the touch in about 10
minutes and may be re-coated. To speed drying, hang jigs in a
heated area with temperatures not to exceed 130 degrees. Keep
air moving with a fan and exhaust escaping solvent fumes.
Fluorescent colors dry flat so for that “Quality” look, use Clear
Gloss for the final coat. Always use a white Base Coat under
Note: White Base Coat and White Paint are the same.
Please note the following colors are not stocked in the "Pint Can"
and will add an additional 7 - 10 days if ordered.
Colors: 015, 017, 020, 021, 023, 026, 027, 028, 029, 032, 033, 034, 037 & 077